TeleHealth Gateway

Key Features

  • PC Connectivity
  • Easy to Use: Plug and Transmit
  • Diabetes Information Management System (DIMS)
  • Comprehensive Data in Systematic Management
  • Connection via Internet or Modem
  • Simple, Reliable and Cost Effective

How To Use

Data Transmission through Ethernet
(FORA GW9014A TeleHealth Gateway contains a build-in DHCP Client Service)

  1. Prepare your internet router (GW9014A contains build-in DHCP Client Service), and make sure that it works properly. For the settings of the internet router, please refer to your service carrier's owner’s manual.
  2. Open FORA GW9014 Gateway kit and take out the contents.
  3. Plug the power adapter into a power outlet and the power adapter port into the gateway.
  4. Connect a RS232 interface cable with any RS232 available device to a RS232 port on the gateway.
  5. Securely insert the ethernet cable to the internet router and the network cable port into the gateway as illustrated below.

  6. Turn on the gateway power. (“O” is displayed if it is turned off, “―” is displayed if it is turned on)
  7. Congratulations! You have completed the entire installation. Please check if the PWR LED indicators are lit as illustrated below.
(c) Altys Group 2016 • CMS Website by Juizi