How to use

How To Use (Blood Glucose)

  • Insert a test strip to turn on the meter. The sequence of LCD displays is: “CHK” and    → flashing    with date and time.
  • Hold the pre-set lancing device firmly against the puncture site. Press the release button to obtain a drop of blood.
  • While    is flashing on the display, touch the absorbent hole on the tip of the test strip to the drop of blood until the confirmation window is completely filled.
  • After the meter counts to 0, your test result will appear along with the date and time and will be automatically stored in memory.

How To Use (Blood Pressure)

  • Sit down for at least 10 minutes before measuring.
  • Place your elbow on a flat surface and relax your hand with the palm facing up. The red line on the edge of the cuff should be approximately 0.8 to 1.2 inch (2 to 3 cm) above your elbow.
  • Apply the appropriate pressure cuff and make sure that the cuff is at the same height as your heart.
  • Arrange the tubing over the main arteries on the inside of your arm. Press    to start.
  • Measurement is in progress: Start inflation → SStop inflation when the cuff pressure is enough → Cuff pressure deflates steadily.
  • The monitor will display the systolic pressure, diastolic pressure, and heart rate alongside the date and time. Press    to switch off.
(c) Altys Group 2016 • CMS Website by Juizi