How to use

Before Measurement

  1. Sit down for at least 10 minutes before measuring.
  2. Place your elbow on a flat surface and relax your hand with the palm facing up.
  3. Apply the proper pressure cuff and make sure the cuff is at the same height as your heart.

Taking Measurements

Single Measurement

  • Press    to start. Then the cuff will begin to inflate automatically.

    The "heart symbol    will flash when a pulse is detected during the inflation.

  • After the measurement, the monitor will display the systolic pressure, diastolic pressure and pulse rate

Averaging Measurement (for FORA P30 Plus only)

  • Press    to start. Then the cuff will begin to inflate automatically.

    The monitor will take 3 measurements consecutively.

  • After 3 measurements are completed, the results are averaged and displayed with "AVERAGE symbol" on the monitor

Auscultatory Measurement (Only well- trained staff may use this mode to measure blood pressure manually.)

  • Press and hold    until "AUS symbol"appears on the display with a beep. The cuff will begin to inflate and then deflate automatically.

    Press    to adjust the inflation pressure if necessary, and release    to start the measurement.

  • The systolic pressure is measured when the operator first hears the sound of the pulse. Then the diastolic pressure is measured until the sound of the pulse disappears.

    The monitor will return to 0 mmHg after the measurement is completed.
(c) Altys Group 2016 • CMS Website by Juizi