How to use

Step 1: Calibrate the Meter

  • Code numbers are used to calibrate the test strips with the meter for accurate results. Please insert the code strip into the meter before testing when you use the meter for the first time and each time you use a new vial of test strips. The code number on the meter display must match the code numbers on the test strip vial and the code strip.

Step 2: Perform a Control Solution Test

  • Insert the test strip to turn on the meter, and push “Main button” to mark this test as a Control Solution Test displayed as “QC”. Apply the control solution and then compare this result with the range printed on the test strip vial within which the range should fall.

Step 3: Perform a Blood Glucose Test

  • Insert the test strip to turn on the meter. Wait for the test strip and blood symbols displayed on the meter to start flashing before starting the test. Hold the pre-set lancing device firmly against the punctured site. Push the release button to obtain a drop of blood.
  • While “blood symbol” is flashing on the display, apply the drop of blood to the absorbent hole on the tip of the test strip until the confirmation window is completely filled.
  • After the meter counts to 0, your test result will appear along with the date and time and it will automatically be stored in the memory.
  • After the meter counts to 0, your test result will appear along with the date and time and will be automatically stored in memory.
  • Eject the used test strip. Dispose off the used strip and lancet safely.

Perform a Blood Glucose Test

Your blood glucose result will display the following messages: (Please work with your doctor to determine a target range that works best for you.)

(c) Altys Group 2016 • CMS Website by Juizi